Typhoon Blast™ 70 Compressed Air Duster, Low GWP

Aerosol degreaser spray is a type of cleaning product designed to remove grease, oil, grime, and other stubborn contaminants from various surfaces. It is commonly used in industrial, automotive, and household applications to clean and degrease machinery, engines, tools, kitchen appliances, and other surfaces where grease and oil buildup can occur. The aerosol form allows for easy application as it sprays the degreaser in a fine mist, which helps to cover a larger area and penetrate into hard-to-reach spots. The degreaser typically contains a mixture of solvents that work together to break down and dissolve grease and oils, making it easier to wipe or rinse away. Chemtronics Degreasing Cleaners, Electro Wash® Products | Vapor Degreaser Learn more in our Blog Follow our Linkedin

Aerosol degreasers are versatile cleaning products designed to remove grease, oil, and other contaminants from various surfaces. They work well on a wide range of greases, including but not limited to: Mineral oils: Commonly found in machinery and automotive applications.Synthetic oils: Including various lubricants used in industrial settings.Engine grease: Accumulated on car engines and mechanical parts.Silicone grease: Often used as a lubricant and sealant in mechanical and electrical applications.Cutting oils: Used in metalworking processes such as machining and milling. The effectiveness of aerosol degreasers may vary depending on the specific formulation and strength of the product, as well as the type and thickness of the grease or oil being targeted. Chemtronics Degreasing Cleaners, Electro Wash® Products | Vapor Degreaser Learn more in our Blog Follow our Linkedin

The red cap on Chemtronics aerosol products like flux removers, degreasers, and Freeze-It Freeze Spray has a notch on the top. That is engineered for the straw to snap in and hold into place so you don’t loose it. The aerosol trigger sprayers that are common on dusters, freeze sprays, and flux removers, have two ways to store the straw when not in use. The hole at the back of the body of the sprayer is just the right size for the straw to slide into place for storage. The slot below the trigger is also the right size for the straw to snap into place, which also has the advantage of locking the trigger.

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.chemtronics.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.chemtronics.com/batch-codes.

That depends on the size of the can and how much you use it. If the can and valving is intact and undamaged, it will not leak or spoil, so can sit on a shelf for many years.

The can of duster must be held in an upright position when spraying. Do not tilt can more than 40 degrees during spraying operation or shake during use. Before use, press actuator to clear valve of any liquid product. Extension tube can be used to remove dust in tight areas. Use short bursts to prevent cooling of can.